Metal Roof Tiles for Building Roof Construction
Types of Building Roofs
The roof of a building is one of the most important construction elements. Its function is to provide protection for the space below it from heat, dust, wind, and rain. The material for the roof itself can be chosen from various materials that are currently available.
Each material has its own advantages. However, if you look at the current trend, the type of metal roof tiles is the one that is widely chosen for various construction needs, not only for houses but also other buildings.
Getting to Know Metal Roof Tiles
The shape of metal roof tiles is sheets. Almost the same as zinc tiles. Its placement is on the roof frame purlin beam, installed with screws.
The size of metal roof tiles varies quite a bit, between 60 to 120cm, with a thickness of 0.3mm and a length of 1.2 to 12m. The material for making metal roof tiles itself is quite unique and different from other roof tiles, namely from a mixture of bitumen sheets and other chemicals. For the model of this metal roof tile itself, there are several that we can know, namely: a flat model that rests on multiplex. This multiplex is attached to a frame that is attached with screws. Another type of metal roof tile is a wavy model that is quite practical and easy to install, namely by screwing it to the purlin beam that has been prepared in advance. To help with lighting during the day, this metal roof tile is accompanied by the use of a glass roof. This tile can help the room get sunlight during the day.
Complementary Components of the Building Roof
The installation of a house roof, whether it is a metal tile type or others, must also be accompanied by the installation of other elements. Some that cannot be separated from the construction of the roof of the house are:
- Gutter
This element on the roof of the house has a crucial function, namely directing rainwater to fall to the ground. The installation is horizontal following the direction of the roof drain. Usually also equipped with a vertical pipe to drain water.
- Lisplang
Lisplang is able to form a sturdy rigid. Lisplang itself functions as a lock for the arrangement of rafters on the roof so that they do not shift and remain in place even when exposed to rain or wind. Lisplang also gives a more beautiful and neat impression to the roof tiles of the house so that it also functions to add to the aesthetic aspect of a building.
The roof of a house in the form of metal tiles or other tiles is one of the important elements of a house. In addition to the types and supporting elements that we must know, it is also important to know what type of roof can be chosen in building construction where metal tiles can be applied, one of which is the type of roof based on its slope.
Getting to Know Roof Types Based on Slope Shape
- Flat roof
Its appearance is simple, like the shape of the roof in general. Because of this shape, the costs incurred are quite affordable with the use of more economical materials when compared to other roof shapes. For this roof shape, metal tiles are more widely chosen because they are easy to apply and have low heat distribution. Another type of roof covering that is also suitable for application on flat roofs is a concrete roof which, although expensive, has high heat distribution.
- Sloping roof
This sloping roof has a roof height equal to or more than half the width of a building. So, why does the roof have to be sloping? One reason is to channel rainwater so that it can easily fall to the ground. The slope also depends on the type of roof used. If the slope is low, then a zinc or metal tile roof can be chosen because its shape is in the form of sheets so it is easier to install.
A sloping roof has the following characteristics:
Its construction is quite complicated, the number of tiles needed is more than a flat roof, and the room becomes cooler.
- Diamond roof
This type of roof is quite unique, with the following characteristics:
Its construction is light with a roof texture that resembles scales, has a high aesthetic value, can be patterned, high durability aka long-lasting.
For the building materials, steel plates, zincalume composite, galvalum composite, copper, and other materials are used.
FINISHING
For the finishing process to make it more beautiful, you can use enamel or powder coating which makes the roof more resistant to all weather. It can also be added with extra waterproofing so that the roof becomes waterproof so that the tiles will be more durable. For each type of roof, there is no requirement to install a certain type of roof. The choice tends to be based on the function of the roof itself, cost, practicality of installation, durability, and also the aesthetics or beauty of the installation of the tiles themselves.
Therefore, the many choices of roof tiles for houses and buildings provide alternatives for choosing the best roof. Like metal tiles, which are not only able to meet the durability element, but also able to meet the aesthetic element with a fairly attractive roof tile appearance. Moreover, this type of tile is also quite easy to install for various types of roofs, both sloping and flat roofs. Although in terms of cost, other types of tiles will be much cheaper. Therefore, the selection of this tile is based on the needs and conditions of each person or construction needs.