14 August 2023

How to Install Good and Correct Galvanizing for Roofs

Galvanized is one of the best types of mild steel in Indonesia. Made using a material that is quite perfect with the addition of several chemicals that make it non-flammable and not susceptible to rust or corrosion. This is also a plus for everyone who wants to build a house without having to spend too much money because hollow galvanized iron is not too expensive when compared to others.


Apart from how to install galvanized roofing for a house which is simpler and faster, it turns out that its use can also be applied with ceramic tiles or kanmri tiles which make it look more perfect and luxurious. But even to install it, you have to pay attention to a number of things so that the construction that has been assembled still meets the standards. And here are some things that need to be considered as well as how to install galvanized roof as a house.


Tips on how to install good and correct galvanizing

Of course, so that everything runs smoothly, you also have to pay attention to a number of things so that all galvanized installation work for the roof of the house can be completed perfectly. And of the many things that need attention, here are some of the core things that you need to pay attention to:


1. First and what you have to fulfill is to always wear work clothes correctly according to the standards

2. Always use a safety hat or helmet (safety helmet) as part of work safety

3. Get used to using work shoes

4. Because it is a material that is quite dangerous if exposed to body parts, then at least to protect ourselves we always use gloves and sleeves made of anti-scratch material

5. Next is cleaning the workplace from dirt or objects that will at least be able to interfere with the work process


Worker Safety at Height

The roof of the house which is located above, of course, makes installation of galvanized frames very careful. Including work that requires us not to be afraid of heights, installation of mild galvalume steel trusses that must be suitable also gives us risks that we don't want, therefore in the way of installing galvanized which is good and correct at least you we must also pay attention to the safety of workers, for that some security tools should also be used like:

1. If work can still be done below or on the floor, then at least you do it first before we raise the mild steel horses to the top

2. But if the work really requires that it be done above, then use a strong barrier or support to put the load from the workers and also the load from the galvanized roof frame

3. Then if it is not possible to install tools to support, then at least we have to use scaffolding or scaffolding so that we really avoid unwanted things

4. And if all of the alternatives above cannot be done, then immediately report it to the work supervisor and say that the work is not safe to carry out.


Roof Frame Construction Installation Process

The way to install galvanized which must be done above at least makes us have to comply with some of the considerations that we have mentioned above. The installation of light steel trusses on the supporting structures of the column or ringbalk type must also be carried out correctly and carefully.


This is so that the galvanized frame can be installed properly and correctly. And here are the technical requirements for how to install galvanized roofs for houses that are good and right:

1. Light steel trusses must be very strong and stable with anchors (dynabolts) on both supports

2. Installation of the horses must also be perpendicular to the ringbalk

3. Then we also have to pay attention to the height of the apex for the installation of the nok above each flat truss

4. Installation of the sloping side of the roof must also be flat and must not be wavy

5. There must be no damage to the protective coating

6. Make sure that the framework that we have installed will not be deformed (change in shape) as a result of the execution of the work.


Final Check

If all the work above has been completed and the roof of the house from the light steel frame has been installed properly and correctly according to the tutorial on how to install galvanizing according to standards, then the last step that every worker must do is check every side of the light steel frame that has been installed is not there are flakes of dirt from the process of cutting mild steel or the use of other metal materials.


This is done so that mild steel will not easily corrode. Because usually if there is one side of the mild steel frame where corrosion occurs it will usually spread quickly to other parts, and this of course will make the mild steel damaged more quickly. And that's at least a tutorial on how to properly and correctly install galvanized roofs for houses